價格：面議

生產地：品牌：李斯特AVL

型號：AVL M.O.V.E. GAS PEMS Por公司傳真：02164139510

移動電話：13581584194更新時間：2018-11-14

上海恒德科技有限公司與1995年成立，由上海交通大學幾位教師創立，目前是上海大眾、一汽大眾試驗設備開發供應商、進口設備代理與維修供應商，德國SINCOTEC公司、TS集團、 BF公司、HUDE公司、ID公司、KUBRICH公司和美國link公司的獨家代理。子公司上海美增汽車試驗有限公司擁有上海、長春兩個試驗室，共約15000平方米，是大眾的認可第三方試驗室，也是國內多家知名品牌整車廠福特、福田、PSA等的試驗供應商。

下攜7個子公司、分公司、辦事處：

-美滬機械電子有限公司（100%）（上海大眾試驗設備開發供應商、進口設備代理與維修供應商）

-香港恒德科技有限公司（100%）（上海大眾、一汽大眾進口設備代理供應商）

-上海美增汽車測試技術有限公司及其長春分公司（50%）（上海大眾、一汽大眾第三方試驗供應商、設備開發與維修供應商）

-SINCOTEC CHINA LTD（49%）（德國SINCOTEC 公司設備技術服務、試驗服務）

-上海恒德網絡科技有限公司（66%）(工程公司：結構與布線工程服務）

-北京辦事處（技術維修服務

-西安辦事處（技術維修服務）

公司經營

合作與榮譽

恒德21年來，致力于為客戶定制符合客戶自身需求的試驗設備，深受客戶及業界好評。其中部分項目已分別獲得國家版權證書、上海市科技成果與鐵道部科技進步獎等。

我們同時也與來自德國和美國的各類高端試驗設備商合作，為國內客戶提供廣泛應用于汽車、航空、鋼鐵等領域的先進試驗設備，進而幫助國內應用廠商提升自身的軟實力。

公司開發與銷售設備(含技術服務)

德國SINCOTEC集團

-高速鐵路部件試驗設備

中國鐵道科學院高鐵車輪車軸試驗 1臺

中國鐵道科學院高鐵軸承試驗 2臺

-汽車發動機部件試驗

一汽大眾質保部發動機曲軸試驗 2臺

上海大眾發動機公司發動機曲軸試驗 2臺

通用五菱發動機曲軸和連桿試驗 1臺

深圳PSA（法國雪鐵龍）發動機曲軸試驗 1臺

中國重汽發動機曲軸試驗 1臺

天潤曲軸公司發動機曲軸試驗 1臺

上海輝蒙發動機缸內高壓試驗 1臺

-汽車發動機總成試驗臺架

上海大眾發動機試驗臺架改造 30套

-汽車底盤部件試驗（橋、轉向器、輪轂、軸承、傳動軸、排氣管、發動機支承等等）

上海大眾汽車底盤部件試驗 9臺

一汽大眾汽車底盤部件試驗 6臺

一汽大眾大眾平臺公司汽車底盤部件試驗 3臺

一汽東機工汽車底盤部件試驗 1臺

北方捷凱 底盤部件試驗5臺

上海匯眾汽車底盤部件試驗 4臺

萬向集團底盤部件試驗 10臺

浙江建新底盤部件試驗 3臺

重慶長江軸承底盤部件試驗 2臺

NSK底盤部件試驗 1臺

FAG底盤部件試驗 1臺

柳州五菱 3臺

中國汽車研究院 2 臺

-德國HUDE汽車安全試驗（碰撞、車身擠壓、氣囊爆破等）

上海寶鋼 1臺

上海大眾 2臺

中國TRW 5臺

萬向精工 1臺

上海延風 1臺

現代MOBIS 1臺

浙江華翔 1臺

海南均達 1臺

南京Faurecia

襄陽航天 2臺

-汽車車身相關試驗（氣動四門兩蓋、電動四門兩蓋、雨刮器、搖窗機）

上海大眾 10臺

上海通用 2臺

博澤 5臺

一汽大眾 2臺

福建奔馳 1臺

-汽車發動機附件試驗（壓力波動）

上海大眾 1臺

新上橡 1臺

-航天航空材料、部件和10000RPM高速軸承試驗

哈工大 1臺

西安交大 1臺

浙江晉億 1臺

成都飛機制造公司 1 臺

-試驗室監控與整車路試

上海大眾試驗室運行監控系統(共二期)

上海大眾試車場路試數據采集與無線寬帶傳輸系統, 以及數據分類管理、分析系統

德國BF 公司

-陽光模擬風洞

上海大眾 2套

一汽大眾1套

一汽新能源 1套

上海汽車 2套

天津CATARC 1套

重慶汽研院 1套

BBAC 1套

福田 1套

江淮 1套

長城 2套

美增 2套

-子公司美增試驗室裝備

整車陽光模擬試驗 2 套

汽車整車和部件存放交變氣候箱 6 臺

壓力波動 1 臺

四門二蓋試驗臺 2 套

搖窗機試驗臺 2 套

后視鏡/中扶手試驗臺 2 套

4通道液壓試驗臺 2 套

單軸共振結構試驗機 1 臺

公司經營

合作與榮譽

The AVL GAS PEMS features a robust design, high accuracy and wide operating temperature range. The device is controlled via the AVL M.O.V.E System Control, which is the central data logger, calculates the online mass emissions and provides interfaces to access e. g. ECU/ CAN data and additional sensors. The AVL M.O.V.E. GAS PEMS is especially designed and optimized in weight and dimension for mounting in trucks and off-road vehicles.

Specially designed for mobile operation, this internal temperature conditioning system ensures reliable operation over a wide operating temperature range of -30 C to + 45 C without any additional external heating or cooling device. For higher temperatures it is possible to connect an external cooling device or a hose to the temperature conditioned passenger compartment. Additionally, all analyzers are mounted inside temperature-controlled enclosures to ensure high measurement accuracy even at changing ambient conditions.

The robust design of the instrument additionally supports these attributes. All analyzers are mounted on vibration dampers. External damping options like a mounting frame with vibration dampers and a rugged case (mandatory for testing non road machinery) provide additional protection and ensure safe mounting.

A dedicated heating circuit protects critical electronic parts and the analyzers when the AVL GAS PEMS is powered on at low temperatures by switching on the heaters/ fans at first. As soon as a certain temperature is reached, the other parts are supplied with power.

A special hibernate mode with reduced power demand makes it possible to keep the internal temperature overnight at a certain value for minimizing the warm-up time in the morning. By switching the AVL GAS PEMS to hibernate mode, an automated start-up at freely definable times via a timer is also possible.

The device is operated with 24V DC, either by using a battery pack or a voltage converter.

A service door makes the access to consumables (e.g. filters) very easy. Optimized components extend the service intervals and reduce the maintenance effort.

Control of the GAS PEMS is done with the AVL M.O.V.E System Control device which calculates the online mass emissions and which provides interfaces to ECU/CAN data and additional sensors like a GPS receiver or an exhaust flow meter. The system control device is the central data logger for storing the different test data within one data file. For the direct exhaust flow measurement differential pressure based exhaust flow meter are available as an option. For data post processing and reporting according e. g. U.S. EPA HDIUT regulations AVL offers a powerful PEMS post-processing software based on AVL Concerto.

Operating temperature (ambient)

-10 C to 45 C/ -30 C to -10 C with optionally available insulating blanket.

Storage temperature

-40 to +70 C
(Oxygen sensor needs to be removed)

Dimensions

Approx. 19" (482,6mm) x 8 HU (356mm) x 540mm/ 670 mm with heated filter on the front (w*h*d)

Weight

Approx. 50kg

Warm-up time at 20 C ambient temp.

1hr

Power demand

22.5 to 27V DC, approx. 450W @ 20 C ambient temperature (with 2m sample line and after warm up)

Sample flow rate

3.5 l/min

Inputs/Outputs electrical

Heated line connectors (3 heating
circles with 2x PT100);
1x Ethernet (TCP/IP )
1x CAN (CAN bus monitoring)
8x Analog out, 4x Analog in
4x Digital out (DC-isolated), 5x digital in (DC-isolated)

Measurement Range

THC:
0 to 30,000 ppmC1

NO/ NO2:
0 to 5,000 ppm (NO)
0 to 2,500 ppm (NO2)

CO/ CO2:
0 to 5 vol% (CO), 0 to 20 vol% (CO2)

Accuracy

CO:
0 to 1,499 ppm: +-30 ppm abs.,
1,500 ppm to 49,999 ppm: +-2% rel.;

CO2:
0 9.99 vol.%: +- 0.1 vol.% abs., 10 - 20 vol.%: +-2% rel.

NO:
0 5,000 ppm: +-0.2% FS or +-2% rel.

NO2:
0 2,500 ppm:  +-0.2% FS or +-2% rel.

THC:
0 to 249 ppmC1: +-5 ppmC1,
250 to 30,000 ppmC1: +-2% rel.

O2:
+-1 vol.% FS

Zero Drift

THC:
1.5 ppmC1

NO/ NO2:
2ppm/8h

CO:
20ppm/8h

CO2:
0,1 vol%/8h

Linearity

Slope : 0,99 slope 1,01,

Intercept 0,5 %,

SEE: 1% of range

and R2: = 0,999

Pneumatics Inputs/ Outputs

ZERO gas, SPAN gas,
Burner gas for HFID, sample gas IN,
exhaust and drainage OUT

顯示更少

Specially designed for mobile operation, this internal temperature conditioning system ensures reliable operation over a wide operating temperature range of -30 C to + 45 C without any additional external heating or cooling device. For higher temperatures it is possible to connect an external cooling device or a hose to the temperature conditioned passenger compartment. Additionally, all analyzers are mounted inside temperature-controlled enclosures to ensure high measurement accuracy even at changing

顯示更多

The AVL Gas PEMS uses a heated FID Analyzer to measure the THC concentrations, which does not require any additional external air supply. Instead, cleaned ambient air is used as burner air. Other than the burner gas (He/H2 mixture), there are no other operating gases that need to be carried.

The NO/NO2 measurement is carried out with an UV analyzer, which can measure NO and NO2 simultaneously and directly without the need of a converter.

For the CO/CO2 measurement a NDIR analyzer is used which was especially optimized for high accuracy and resolution of the CO channel at low concentrations.

All analyzers are mounted inside temperature-controlled enclosures to ensure stable conditions and a high accuracy even at changing ambient conditions.